
01 / 02
CarsVans
KEETEC CJS3000-TI
2-in-1 jump starter and tyre inflator
The CJS3000-TI combines a jump starter and a tyre inflator in one unit. With 3000 A peak current it starts a car with a flat battery, and the built-in compressor inflates tyres from 0.5 to 10.3 bar. Just set the target pressure – the compressor stops automatically once it's reached. A clear LCD shows pressure in bar or PSI along with battery status.
Technical parameters
- Peak current
- 3000 A
- Cranking current
- 400 A
- Battery capacity
- 44.4 Wh / 3000 mAh
- Battery voltage
- 14.8 V
- Battery life
- > 1000 cycles
- Pressure range
- 0.5–10.3 bar
- Inflator mode
- target pressure, automatic shut-off
- USB-C
- 10 W input
- USB-A output
- 5 V / 2.4 A
- Charging time
- 4.5 h
- Display
- LCD – pressure in bar / PSI, battery status
- LED light
- yes
- Dimensions
- 21 × 13 × 6 cm
- Weight
- 1 kg
- Operating temperature
- -20 °C to +60 °C
Features
- Jump starter and tyre inflator in one
- 3000 A peak current, 400 A cranking current
- Inflates tyres from 0.5 to 10.3 bar (150 psi)
- Target pressure setting with automatic shut-off
- LCD showing pressure in bar / PSI and battery status
- 44.4 Wh battery (3000 mAh / 14.8 V) rated for over 1000 cycles
- 5 V / 2.4 A USB-A output for charging your phone
- Built-in LED light
- Overcharge and over-discharge protection, fuse and reverse-polarity protection
How to use
How to jump-start a 12 V vehicle
The jump starter must be charged above 20%. Don't press BOOST until the clamps are correctly connected to the vehicle battery.
- 01Plug the blue connector of the jumper cables into the jump starter.
- 02Connect the red clamp to the positive (+) and the black clamp to the negative (−) battery terminal.
- 03When the indicator shows steady green, start the engine.
What the indicator means
- Steady green
- The clamps are connected correctly and the unit is on. You can start the engine.
- Steady red
- The clamps are reversed. Reconnect them correctly and continue once the light turns green.
- Flashing green
- The vehicle battery voltage is too low. Press BOOST and, once the green light is steady, start within 30 seconds.
- No light
- The vehicle battery may be damaged or unresponsive. Check the clamps, press BOOST and, once the green light is steady, start within 30 seconds.
How to inflate a tyre
- 01Connect the air hose to the tyre valve.
- 02Set the target pressure.
- 03Start inflating – the compressor stops by itself once the pressure is reached.
Downloads
CJS3000-TI quick guide
KEETEC CJS3000-TI
Related products
Want to sell KEETEC?
Become a TSS Group partner. Registration is simple and we'll get back to you with the next steps.



