KEETEC TI 160

Cordless dual-piston tyre inflator, 160 psi

The TI 160 is a portable cordless inflator with a dual piston that pumps up tyres quickly, with no cables. Pick one of five modes – car, motorbike, bicycle, ball or custom pressure – and it stops automatically once the set value is reached. The LCD shows pressure in PSI and battery status, and the USB-A port can charge your phone.

Technical parameters

Pressure range: 0.3–11.0 bar (160 psi)
Modes: car, moto, bike, ball, custom + auto stop
Battery capacity: 37 Wh / 2500 mAh
Battery voltage: 14.8 V
Battery life: > 1000 cycles
USB-C: 18 W input
USB-A output: 5 V / 2 A
Charging time: 2.5 h
Display: LCD – pressure in PSI, battery status
LED light: yes
Dimensions: 19 × 8 × 6.5 cm
Weight: 0.9 kg
Operating temperature: -20 °C to +60 °C

Features

Dual piston for faster inflation
Pressure 0.3–11.0 bar (160 psi)
5 modes: car, motorbike, bicycle, ball and custom
Stops automatically at the set pressure
LCD showing pressure in PSI and battery status
37 Wh battery (2500 mAh / 14.8 V), charges via 18 W USB-C in 2.5 h
5 V / 2 A USB-A output for charging your phone
Built-in LED light
Overcharge and over-discharge protection

How to use

How to inflate a tyre

01Connect the hose to the tyre valve.
02Use the settings button to pick a mode (car, motorbike, bicycle, ball or custom). Adjust the pressure with + and −.
03Press the power button to start inflating.
04When the compressor stops by itself, disconnect the hose from the valve.

Inflation modes

Car: default 36 PSI · range 14–51 PSI
Motorbike: default 35 PSI · range 14–43 PSI
Bicycle: default 60 PSI · range 20–160 PSI
Ball: default 8 PSI · range 4–16 PSI
Custom: default 20 PSI · range 4–160 PSI

Good to know

On and off: Hold the power button for 2 seconds. If left unused, the compressor switches off after 30 seconds.
Charging: Charge via USB-C. If you don't use it, top it up at least every 3 months.
Temperature: Works from −20 to +60 °C. Don't leave it for long in a car parked in the sun.
Pressure units: Check the unit (BAR, PSI, kPa) before inflating. 1 bar = 14.5 PSI = 100 kPa.

Downloads

TI160 quick guide

KEETEC TI160

SK/CZ